News

Table of Contents

Category

Products

Send Your Inquiry Today

Stone Production Process And The Using Of Granite Marble Machine

Stone production process and the using of granite marble machine

Release time: 2017-09-13 Author: China Stone Network www.stone365.com

A flat,

  

1, marble plate

  

Marble blocks cut (tug back net) – (Cumo) – (positive frictioning) – polished (sandblasting, pickling, litchi surface etc.) – cutting edge (glue) – typesetting – processing – Inspection – protective packaging

  

2, marble composite board

  

Marble blocks and floor panel tug of cutting – edge cutting (standard specifications, thickness of 20 mm and 8 mm below the margin, specifications and thickness of more than 20 plus a margin of 15 mm) – – to – thickness bonding section (coarse) – positive frictioning – polished (sandblasting, pickling, litchi surface etc.) – cutting edge (standard specifications, thickness of 20 mm below the double knife, multiple specifications and the thickness of more than 20 single cut) – (glue) – typesetting processing – Inspection – protective packaging

  

3, marble sheet (non standard)

  

Marble blocks cut double back net tug of – Section – thick (coarse) – positive frictioning – hand polished – cutting edge grinding – (glue) – typesetting processing – Inspection – protective packaging

  

4, marble sheet (standard)

  

Disc saw cutting blocks – double back net – to – section thickness (coarse grinding) – positive frictioning – production – Inspection – protective packaging

  

5, granite plate

  

Circular saws (sand saw) – cutting blocks (fire, ax chop, polished litchi surface, such as sand blasting) – cutting – typesetting – processing – Inspection – protective packaging

  

6, granite plate (non standard)

  

Block cutting – thickness – polishing – cutting edge grinding hand – processing – Inspection – protective packaging disk saw

  

7, granite plate (standard)

  

Disc saw cutting blocks – production – Inspection – protective packaging

  

8, plate processing

  

(1) back down (on the back of the stone cutting border with a certain angle and size) – can be executed by trimming machine.

  

(2) is inverted (according to a certain angle and size in the frontal border stone cutting) – by trimming machine, hand stitching processing execution of more than 5*5, 5*5 and the following processing by hand, need polished by hand processing execution.

  

(3) is slotted (according to a certain depth and width of the stone in front of the border or at a certain angle cutting type U, type V or semicircular groove) – cutting machine, hand processing with stitching, polished by hand processing need to perform.

  

(4) (on the back of the border back notching cutting stone in accordance with certain width and depth) – cutting machine, polished by hand processing need to perform.

  

(5) side polished (on the side edges of the board have the same specifications – polishing) can be clamped together by hand grinding polishing pieces, specifications of complex processing execution by hand.

  

(6) (according to a certain angle, cutting angle in the front surface of the board is cut, make the surface into a specific geometry) – linear shape execution machine is composed of a cutting edge, if there is a curved edge by hand or machine to perform processing.

  

(7) (open hole in the plate holes of various shapes) – according to the need can be respectively through drilling, water knife or hand finished.

  

(8) sticky side (to make the edges of the plate thickness of composite plate and special requirements in the front or back edge paste strip plate) – hand processing execution

  

(9), round and round edges of 1/4, the French side (duck mouth to increase the decorative effect according to customer special requirements in specific shape, edge) – specific shape grinding wheel machining processing, polishing, hand draw stitching

  

(10) (a patterned planar pattern with a variety of color stone mosaic) – cutting – hand processing, assembly, bonding – walking re grinding polishing

  

Two, arc plate 

  

1, granite arc plate

  

Barrel saw or wire saw processing blank – (thick) – hand polished (AX chop, mill fire, blasting) – cutting machine cutting edge – processing – Layout – Inspection – protective packaging

  

2, marble arch board

  

Barrel saw or wire saw processing blank – (thick) – positive frictioning – hand Mill (pickling, polishing sand etc.) – cutting machine cutting edge (glue) – typesetting processing – Inspection – protective packaging

  

, three lines

  

, 1 marble straight lines.

  

Circular saw or marble cutting edge cutting machine, saw cutting blank lines – copying machine model – hand stitching and other processing – (positive frictioning) – hand polishing processing (sandblasting, pickling etc.) – (glue) – typesetting cutting machine cutting head – Inspection – protective packaging

  

, 2 marble curved lines

  

Circular saw or marble cutting – edge cutting machine saw cutting blank – hand processing molding (positive frictioning) – hand polishing processing (sandblasting, pickling etc.) – (glue) – typesetting cutting machine cutting head – Inspection – protective packaging

  

3, granite line

  

Cutting – edge cutting machine cutting blank – copying machine model – hand stitching processing lines again other hand polished processing circular saws (fire, ax chop blasting etc.) – cutting machine cutting head – Inspection – protective packaging

3. Granite bars

  

Cutting – edge cutting machine cutting blank – copying machine model – hand stitching processing lines again other hand polished processing circular saws (fire, ax chop blasting etc.) – cutting machine cutting head – Inspection – protective packaging

  

4, granite arc line

  

Cutting – edge cutting machine cutting blank – hand – hand polished other processing processing circular saws (fire, ax chop, blasting) – cutting machine cutting head – Inspection – protective packaging

  

, four cylinder

  

, 1 marble columns

  

Circular saw – cutting lathe molding surface scrape – polishing lathe (pickling, blasting) – (glue) – typesetting machine test – cut – truncated protective packaging – note: surface grooving hand processing execution

  

2, granite column

  

Cutting – lathe lathe – polished circular saws (fire, ax chop, blasting) – cutting – edge – door truncated machine inspection and packaging – note: surface grooving hand processing execution

  

Five, shaped sculpture

  

1, marble surface carving

  

Circular saw or marble cutting – edge cutting machine saw cutting blank – hand engraving molding (surface scraping) – hand processing (sandblasting polishing etc.) – Inspection – protective packaging

  

, 2 granite plane carving

  

Cutting blank – hand engraving other hand polished edge cutting processing machine, cutting circular saws (fire, ax chop, blasting) – Inspection – protective packaging

  

3, marble carving (round)

  

Circular saw or marble cutting – tug of hand processing carving – (surface scraping) – hand processing (sandblasting polishing etc.) – Inspection – protective packaging

  

4, granite carving (round)

  

Cutting – hand carving processing – hand processing, polishing circular saws (fire, ax chop, blasting) – Inspection – protective packaging six, mushroom stone disk saw moppet – hand cracking natural – – cutting edge – cutting machine layout manual trimming – Inspection – door – package