News

Wood-Based Activated Carbon for Sugar Color Removal

Basic Info.

Model NO.:HC-WBAC001         Artificial Graphite Type:Graphite Heat Exchanger         Active Carbon Material:Wooden Activated Carbon         Carbon Content:High-Carbon         Pore Diameter:Microporous         Manufacturing Method:Physical Method of Activated Carbon         Type:Gas Adsorption         Appearance:Granular         Usage:Environmental Protection Industry, Chemical Industry, Food Industry, Electric Power Industry, Petrochemical Industry, Gold Industry         Physical Properties:Scurf Resistance         Chemical Properties:Ph Value         Adsorption Properties:Carbon Tetrachloride Adsorption Value         Size:0.6-1.2mm, 0.8-1.6mm, 0.8-1.8mm, 1.0-2.0mm, 1.         Trademark:hongchang         Specification:0.5-1 1-2 2-4mm         Origin:China Henan

Product Description

Wood-based Activated Carbon [1] with quartz sand filter[2] in conjunction with the promotion of China’s current rapid filter double and triple filter, the best material canister filter. Is to improve the filtration rate per unit area increases exponentially increase the amount of water and interception capabilities, reduce project cost and most effective way to reduce the footprint. Widely used in water treatment chemical, metallurgy, thermal power, pharmaceutical, paper, printing and dyeing, food and other production before and after the process.

Wood-based Activated Carbon
Wood-based Activated Carbon is a filter with filter water treatment industry. Anthracite filter is made of high quality anthracite as raw material, selection of pieces, powder, sieve processing technology is widely used double, three fast filter material. Practical in general acidic, neutral alkaline purification treatment, with good surface area, the indicators have reached the Ministry of Construction (CJ / T44-1999) standards. Anthracite is specially selected minerals from deep, with the highest percentage of carbon content. Anthracite filter using artificial classification, can reduce irrelevant minerals and lower ash content. After filtration and washing is also to ensure that it is suitable for use in water filtration. Due to a good ability to maintain the solid particles, and therefore can be reliably improved anthracite scavenging suspended particles. In addition, its low coefficient of uniformity, help speed up the flow rate.

 Packaging and storage:  50kg bags, plastic bags, the product should be stored indoors in a dry place.  Anthracite has the following features:  Color: Black  Carbon content: 95%  Gravity: 1.65 + 0.05  Alkali-soluble: 0.7 + 0.3  Acid-soluble: 0.7 + 0.3  Acid soluble in water: & amp; lt; .2%  Hardness: Mohs hardness of 3.0-3.5 degrees  Density: 52 lbs / cu ft  Size: 0.60 – 62.00 mm 

Anthracite is specially selected minerals from deep, with the highest percentage of carbon content. Water filter using artificial classification, can reduce irrelevant minerals and reduced ash content. After filtration and water washing filter also ensure that it is suitable for use in water filtration. Due to a good ability to maintain the solid particles, and therefore can be reliably improved anthracite scavenging suspended particles. In addition, its low coefficient of uniformity, help speed up the flow rate.

Type Fixed carbon
min
Gravity
g/cm3
Hardness
Moh
min
Bulk density
Ton/m3
Uniformity
Coefficient
Attrition rate plus
Crashed rate
max
Anthracite filter media(F05) 60%,65%,70%,
75%,80%,85%
1.4-1.6 2.8-4.0 0.75-1.00 1.3,1.4,1.5,
1.6,1.7 max
3.5%
Particle size
mm
0.6-1.2mm,  0.8-1.6mm,  0.8-1.8mm,  1.0-2.0mm,  1.2-2.4mm, 1.4-2.5mm, 2-3mm, 2.5-4.0mm,  2.5-5.0mm,  3.5-7.4mm,  6.3-11.2mm,  11.2-17.5mm etc(other specs. are available)